SanDisk SSD X100 Product Manual (Released) Rev 1.0
© 2011 SanDisk® Corporation 35 Document No. 80-11-01842
8.2 Identify Data
The following table defines the specifics of the Identify Data returned by the SSD X100.
Data Field Type Information
ATA General configuration: bit-significant information
ATA Default number of cylinders (depends on capacity)
Default number of sectors per track
Serial number in ASCII (left-justified)
Firmware revision in ASCII (left-justified)
Model number in ASCII (left-justified) for SSD X00.
SKU without dash; X depends on capacity and form factor.
Maximum No. of sectors in Read/Write Multiple command
Trusted Computing feature set is not supported
LBA and MWDMA modes supported
PIO data transfer cycle timing mode
Current number of cylinders
Current sectors per track
Current capacity in sectors (LBAs)
Multiple sector setting is valid (Multiple = 1)
Total number of sectors addressable in LBA Mode
Bits:15-8: Multiword DMA mode active
Bits: 0-7: Multiword DMA modes supported
Advanced PIO modes supported
Minimum multiword DMA transfer cycle time per word (ns)
Commentaires sur ces manuels