SanDisk SSD P4 Manuel d'utilisateur télécharger pdf (Page 8)

SSD SATA 5000 2.5" Datasheet

Preliminary, Rev 0.2

4. Physical Characteristics

4.1 Mechanical

Table 6: SanDisk SSD SATA 5000 2.5” Mechanical Dimensions and Weight

Parameter

Specifications

Width

69.85 ± 0.25 mm

Height

9.5 ± 0.2 mm

Length

102.0 ± 0.25 mm

Maximum Weight

96 gr

4.2 Mounting Instructions

Before unpacking and installing the drive, take anti-static measures in

order to avoid damage to the drive. The drive may be exposed to potential

handling and electrostatic discharge (ESD) hazards. The following

guidelines are recommended.

 Keep the drive in ESD bag until the drive is ready to be installed.

 Wear an ESD-proof wrist strap before handling the drive.

 Avoid touching the drive’s connector. Handle the drive using its

edge or frame.

 Rest the drive on an antistatic surface until mounting it.

 Handle the drive carefully, taking care not to drop or bang it against

other objects.

 Do not remove, damage or cover any product labels. Removal of

such labels voids the warranty.

 The ambient temperature at the top cover should not exceed the

maximum operating temperature of the drive.

 Exercise caution when removing the drive from the host as the

drive may have heated up.

 The recommended mounting screw torque is 0.675Nm.

 The recommended mounting screw depth is 4.0mm (0.157in) for

bottom for horizontal mounting.

4.3 Installation Orientation

The SSD can be installed in all axes (6 directions). For a mechanical

drawing, see Figure 2.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 34 35

Pas de commentaire

SanDisk SSD P4 Manuel d'utilisateur Page 8